GEM LITE EMULSION SMOOTH WALL FINISH FOR INTERIORS is highly economical, tried and trusted, based on Emulsions and prepared to give good, pleasing looks to the Interiors. A perfect value for money
for the interior walls.
DIRECTION FOR USE:
Remove loose plaster and dust particles and rub lightly with
sand paper. Previous coatings if any must be scrapped off. Cracked
or Flaked painting should be scrapped off completely. Apply a coat
of Gemprime
Synthetic Cement Primer - water Thinnable wherever
necessary, apply Gem Acrylic Wall Putty to bring smooth and
eveness to the surface and putty should be applied only in thin
layer and a coat of Gemprime Synthetic Cement Primer is
recommended as an undercoat on the top of putty for eliminating
the patchy appearance in final coats. GEMLITE Emulsion is supplied
as a thick paste and has to be thinned with
potable water and
water is to be added slowly to the paste while stirring to obtain
brushing consistency.
|
PRODUCT SPECIFICATION : |
|
PROPERTIES : |
Surfaces painted with GEMLITE Emulsion Smooth Wall Finish for Interiors wear a durable, beautiful finish with light sheen and can be wiped clean with water and mild soap solution after at least 4 weeks of drying. GEMLITE Emulsion gives a smooth finish to the walls. |
|
COLOUR : |
As per shade card |
|
CONSISTENCY : |
25000 + 3000 CPS @ 30°C by Broke field viscometer |
|
AREA OF APPLICATION : |
Plaster, Brick Works, Stucco, Asbestos, etc. |
| THINNER RECOMMENDED : | Potable water |
|
DRYING TIME : |
Surface drying 30 min. Recoat 4-6 hours |
|
METHOD OF APPLICATION : |
Brush, Roller or Spray |
|
PACKING AVAILABLE : |
20 Ltrs, 10 Ltrs, 4 Ltrs, 1 Ltr |
|
COVERING CAPACITY : |
8-10 sq/mtr depending on shade and surface preparation |
|
FINISH : |
Smooth & Matt |
|
PRIMER RECOMMENDED : |
GEMPRIME Synthetic Cement Primer |