GEMGRACE EXTERIOR EMULSION
is a synthetic
co-polymer based wall coating for exteriors.
It is
recommended for application on exterior walls in dry or
moderately humid climates.
APPLICATION :
Apply two
coats of GEMGRACE EXTERIOREMULSION by thinning 1 liter of
paint using
not more then 600 ml. of potable water. A gap
of 41/2 - 6 hours should be given between coats.
On fresh Walls apply a self-priming coat by thinning 1 liter of
paint with 1 liter of water followed
by two coats as
described above. lt is advisable to give horizontal
surfaces three coats.
GEMGRACE
EXTERIOR EMULSION can be brushed or rolled.
DIRECTIONS FOR USE :
Clean the surface thoroughly using wire brush. Take more care
in case of horizontal.
Surfaces.
Surface imperfections are to be filled ONLY by a
mixture of white cement and sand
mixed in
the ratio of 1:3 Any previous growth of moss or fungus
is to beremove completely by wire brush
and cleaning with water.
|
PRODUCT SPECIFICATION : |
|
PROPERTIES : |
It has out-standing adhesion to
different types of surfaces like cement plaster, asbestos etc. A fully cured film of GEMGRACE exhibits excellent resistance to chalking, cracking and fading. |
|
COLOUR : |
As per shade card |
| THINNER RECOMMENDED : | Potable water |
|
METHOD APPLICATION : |
Brush roller |
|
RE-COATABILlTY : |
After about 4-6 hours |
|
COVERING CAPACITY : |
5 - 6 sq meters per liter in two coats on normal cement plaster. |
|
PACKING AVAILABLE. : |
20 Ltrs, 10 Ltrs, 4 Ltrs & 1 Ltr. |