GEMPEX 100% ACRYLIC EXTERIOR PAINT is a water based pure acrylic wall coating for exterior surfaces.
It is an ideal coating for application on exterior walls in dry or humid climates. It has outstanding adhesion to
different substrates like Cement Plaster, Asbestos board etc. The dry hard film of GEMPEX 100%
ACRYLIC EXTERIOR PAINT exhibits very good resistance to chalking and does not cracks, thanks to the formulation
which takes care of expansion / contraction of the substrate.It is well fortified with powerful biocides to.
Offer both in Can and dry film protection. You can rest assured your cherished home is well protected from a wide
array of micro organisms both algal & fungal. The pigments used in GEMPEX 100% ACRYLIC EXTERIOR PAINT
are of prime quality to provide years of non-fading, non-chalking brilliance.

APPLICATION
Clean the surface thoroughly using wire brush. Surface imperfections like cracks and holes are to lie filled with
a mixture of white cement and fine sand ONLY (in the ratio 1:3). For freshly plastered surfaces, apply
a self priming coat by mixing paint and water in equal proportion. Apply 2-3 coats by diluting 1 litre of GEMPEX
with maximum 400 ml of water. A gap of 4-6 hours should be given between two coats.
No priming is required since the product itself takes care of it. Please do not over thin. Please ensure horizontal
surfaces like window ledges and canopies are given a third coat which will prove economical in
the long run. This product can be brushed or rolled. On a normally plastered Cement surface, per litre should be
able to cover 5-6 sq. mts. in two coats.