|
PROPERTIES :
|
Fast setting and good sealing
property. Exhibits good
resistance towards wall moisture and alkaline elements.
|
|
SURFACE PREPARATION : |
Clean
the surface well and remove all the loose matters. Apply two
coats of this Primer with an interval of 6 hours. Light cut with
sand paper No.320 and apply subsequent coats of finish paint. This
Primer can be tinted with the required stainer to enhance the
build up of the top coat.
|
|
AREA OF APPLICATION : |
Plastered walls, Asbestos,
Concrete & Brick Walls etc.
|
|
SUPPLY VISCOSITY : |
90+10seconds
by Ford Cup B4 @ 30 degree Celsius. |
|
RECOMMENDED THINNER : |
GEMLITE
Thinner for Enamel
|
|
APPLICATION METHOD : |
By Brush or Spray @ 40-50
PSI
|
|
APPLICATION VISCOSITY :
|
30-35
Sec. |
|
COVERING CAPACITY :
|
12 Sq.
mts/ltr |
|
FINISH : |
Smooth & Matt
|
|
DRYING TIME : |
Surface Dry not more than 1
hour. Hard Dry not more than 18 hours.
|
|
FLASH POINT : |
Above 30 degree Celsius.
|
|
PACKING AVAILABLE : |
10 Lts, 20 Lts, 4 Lts, 1 Ltr &
500 ml.
|